PRODUCTS LIST

TESTIMONIALS

Hello Sir, on my network there was a lot of problem with LCD specially humming on video and humming bar too, Read More...


Optical Transmitter : 1310

Features:

  • 860MHz Bandwidth.
  • RF input Level -20dB test point.
  • High performance DFB laser to provide high quality signal.
  • Advance pre- distortion correction circuit to improve the performance.
  • Integrated pre-amplifier with low noise figure & disortion suitable for low input level.
  • High efficiency switching power supply to meet the AC voltage fluctuation (85V- 265V).
  • Reliable thermal structure design to ensure high stability & long operation life of the unit.
  • LCD panel to provide real time display of each parameter of its operating status.
  • Optical output failure alarm & Laser switch off control.
  • Auto Power Switching.
  • Self Diagnosed system.
  • Optic & RF input selection.


Optical Transmitter : 10dBm Mini

Features:

  • It Contains One Hybrid Optical IC and Dual RF Hybrid IC.
  • Slope & Gain Control.
  • It has 8 Led Indicator for Optical Signal at The.
  • Input from -5dBm to +2 dBm.
  • It has SMPS Power Supply.
  • With A/c Mains Facility.
  • It has full Aluminium Body for BETTER HEAT DISSIPATION.
  • Excellent C/N, CSO & CTB Characterstics.


TE 94 TR (Optical Transmitter Cum Node)

Features:

  • This Unit Can Be Used For Converting Optical Signal to RF(as In Case of regular Node.) Signal and at the same time can be used as 10dBm Optical Transmitter.
  • It gives Optical Signal of 6dBm either from Optical input ot from locally fed RF input signal.
  • User friendly, low cost.
  • Suitable for use in 48 to 860MHz optical.
  • Optical output: 10dBm.
  • Frequency Range: 48 to 860MHz
  • Optical Input Signal Requirement :0 dBm.
  • RF Input Requirement: 75 dB micro volt.
  • RF output on both the Port: 100dB Micro Volt.


Optical Receiver TE Node-900-4

Features:

  • It Contains One Hybrid Optical IC and Dual RF Hybrid IC.
  • Slope & Gain Control.
  • It has 8 Led Indicator for Optical Signal at The.
  • Input from -5dBm to +2 dBm.
  • It has SMPS Power Supply.
  • With A/c Mains Facility.
  • It has full Aluminium Body for BETTER HEAT DISSIPATION.
  • Excellent C/N, CSO & CTB Characterstics.


Optical Receiver TE Node 864

Features:

  • Frequency Range: 48 to 860MHz.
  • Optical Input Level +2dBm to -5dBm.
  • RF output level 102BV @ 0dBm optic input.
  • It consists of 2 ICs; one for RF & other for Optical RF converter.


Optical Receiver TE Node-96-4

Features:

  • It Contains One Hybrid Optical IC and Dual RF Hybrid IC.
  • Slope & Gain Control.
  • It has 8 Led Indicator for Optical Signal at The.
  • Input from -5dBm to +2 dBm.
  • It has SMPS Power Supply.
  • With A/c Mains Facility.
  • It has full Aluminium Body for BETTER HEAT DISSIPATION.
  • Excellent C/N, CSO & CTB Characterstics.


Optical Receiver TE-97 DS Switcher Node:

Features:

  • It has a unique Master & Slave switching function.
  • When any of one fiber input gets disconnected it automatically switches on to aanother input & indicate by buzzer.
  • It has two RF output.
  • LED indicator provided to indicate fibre feed.
  • It has SMPS power supply with A/C mains facility.
  • It consits for big die cast body for better heat dissipation.
  • It has SMPS power supply with A/C mains facility.
  • Frequency Range: 48 to 860MHz.
  • Optical input Level +2dBm to -5dBm.
  • Highly recommended for digital network.
  • Excellent C/N, CSO & CTB Characterstics.


Optical Receiver TE-98 Switcher Node:

Features:

  • It has a unique Master & Slave switching function.
  • When master fiber input gets dissconnected itautomatically switches on toslave input.
  • It has two RF output.
  • It has option to choose AGC or MGC.
  • When master fiber is disconnected it is indicated by buzzer.
  • LED indicator provided to indicate fibre feed.
  • It has SMPS power supply with A/C mains facility.
  • It consists of big die cast body for better heat dissipation.
  • Frequency Range: 48 to 860MHz.
  • Optical input level +2dBm to -5dBm.
  • Highly recommended for digital netowrk.
  • Excellent C/N, CSO & CTB Characterstics.


Optical-Receiver TE-94 Node:

Features:

  • It contains 3 Hybrid Ics, two for the RF & one for the optical to RF converter.
  • Slope & Gain controls.
  • It has 8 LED indicators to give more accurate indiaction of the optical power at the input.
  • It has SMPS power supply with A/C mains facility.
  • Choices of plugging two way splitter or one way tap-off at the output to get either equal or -10dB level at the second RF output.
  • An additional attenuator is provided at the o/p of the optical to RF convertor to maintain the proper input level to the RF hybrid amp inside to avoid the overloading of the same & thereby getting the optimum o/p level without disortion.
  • It can be used to mixing of local Digital RF Channel with the help of built in mixer.
  • It consists of big die cast body better heat dissipation.
  • Frequency Range: 48 to 860MHz.
  • Optical Input Level +2dBm to -5dBM.


Optical Receiver TE-93 Node

Features:

  • It contains 3 Hybrid ICs, two for the RF & one for the optical ti RF converter.
  • Slope & Gain Controls.
  • It has 8 LED indicators to give more accurate indication of the optical power at input.
  • t has SMPS power Supply with A/C mains facility.
  • Choices of plugging two way splitter or one way tap-off at the output to get either equal or -10dB level at the second RF output.
  • Frequency Range: 48- 860MHz.
  • Optical input Level +2dBm to -5dBm.
  • Excellent C/N, CSO & CTB Characeteristics.


Optical Receiver TE-92 Amp. + Node

Features:

  • It contains one hybrid optical IC & one 34dB RF.
  • It can switch tonode from amplifier & vice a versa through its jumper facility.
  • Slope & Gain Controls.
  • It has 4 LED indicators for optical signal at the SMPS power supply with A/C mains facility.
  • Choices of plugging two way splitter or one way tap off at the outputto get either equal or -10dB Level at the second RF output.
  • Frequency Range: 48- 860MHz.
  • Optical Input LEvel +2dBm to -5dBm.
  • RF output level: proportional to optical input.
  • Excellent C/N, CSO & CTB Characterstics.


Optical Recever TE-90 Amp. - Node

Features:

  • It contains one Hybrid optical IC & one 34dB RF.
  • It can switch to node from amplifier & vice a versa through its jumper facility.
  • Slope & Gain Controls.
  • It has 4 LED indicators for optical signal at the input from -5dBm to +2dBm.
  • It has SMPS Power supply with A/C mains facility.
  • Choices of plugging two way splitter or one wat tap off at the output to get either equal or -10dB level at the second RF output.
  • Frequency Range: 48 to 860Mhz.
  • Optical input level +2dBm to -5dBm.
  • RF output Level: proportional to optical input.
  • Excellent C/N, CSO & CTB Characterstics.


Optical Receiver TE Node-5040

Features:

  • It consits of one Hydrid IC for RF.
  • It can be customized to single or double out.
  • It has 8 LED indicators for optical power.
  • Slope & Gain controls.
  • It consits of die cast body for better
  • heat dissipation.
  • Frequency Range: 48 to 860MHz.
  • Optical Input Level +2dBm to -5dBm.
  • Excellent C/N, CSO & CTB Characterstics.


Optical Receiver TE-4050 RF Convertor :

Features:

  • Economical Optical to RF Signal Converter.
  • It has LED indicator for optical input power Level.
  • It gives 80dB microvolt of RF signal for the optical input of 0dBm.
  • Frequency Range : 48 to 860Mhz.
  • Optical Input Level +2dBm to -5dBm.
  • Excellent C/N, CSO & CTB Characterstics.
  • It works on both mains & line Powering.